Control Lever Housing Bezel Replacement

Control Lever Housing Bezel Replacement

Removal Procedure

1. Remove the transmission control lever knob. Refer to Transmission Control Lever Knob Replacement Transmission Control Lever Knob Replacement.

2. Remove the console trim plate. Refer to Console Trim Plate Replacement (9C3) Console Trim Plate Replacement (9C3).





3. Remove the four housing bezel retaining screws (1).

4. Disconnect the lamp sockets from the housing bezel.

5. Unclip the housing bezel (2) from the transmission control assembly.

Installation Procedure





1. Position the housing bezel (2) to the transmission control assembly.

2. Connect the lamp sockets to the housing bezel.

3. Install the four housing bezel retaining screws (1).

4. Install the console trim plate. Refer to Console Trim Plate Replacement (9C3) Console Trim Plate Replacement (9C3).

5. Install the transmission control lever knob. Refer to Transmission Control Lever Knob Replacement Transmission Control Lever Knob Replacement.