Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Linkage: Adjustments




Range Selector Lever Link Adjustment

1. Ensure that the shift lever is in the park (P) position.

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

3. Loosen the selector rod on selector retaining bolt.

4. Ensure that the transmission manual shaft lever is in the park (P) position.

Caution:
Refer to Fastener Caution Fastener Caution.

5. Hold the selector lever on transmission against the rear stop to eliminate any play.

1. Tighten the selector lever to the transmission manual shift shaft adjustment nut to 25 Nm (18 lb ft).

2. Tighten the selector lever to the transmission control assembly adjustment bolt to 30 Nm (22 lb ft).

6. Lower the vehicle.





7. Inspect the operation of the starting system with the shift lever in each position. The engine should only crank when the lever is in the PARK or NEUTRAL position.