Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Captiva Sport FWD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair >> Transmission Front Mount Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Front Mount Replacement




Transmission Front Mount Replacement

Removal Procedure

Warning

Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the engine protection shield. Refer to Engine Splash Shield Replacement.

3. support the powertrain with a suitable jack stand.





4. Remove the front transmission mount to frame bolt (1).





5. Remove the front transmission mount to transmission bolts (1).

6. Remove the front transmission mount (2).

Installation Procedure





1. Install the front transmission mount (2).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the front transmission mount to transmission bolts (1) and tighten to 50 Nm (37 lb ft).





3. Install the front transmission mount to frame bolt (1) and tighten to 100 Nm (74 lb ft).

4. Remove the jack stand supporting the powertrain.

5. Install the engine protection shield. Refer to Engine Splash Shield Replacement.

6. Lower the vehicle.

pro multis · About Operation CHARM