Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Corvette V8-6.2L SC >> Repair and Diagnosis >> Maintenance >> Hoses >> Power Steering Line/Hose >> Service and Repair >> Power Steering Gear Inlet Pipe/Hose Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Steering Gear Inlet Pipe/Hose Replacement




Power Steering Gear Inlet Pipe/Hose Replacement (LS9)

Removal Procedure

1. Place drain pans under the vehicle as necessary.





2. Disconnect the power steering gear inlet hose (1) from the power steering pump.





3. Disconnect the power steering gear inlet hose (1) from the steering gear.

4. Maneuver the power steering gear inlet hose as necessary in order to remove the hose from the vehicle.

Installation Procedure

1. Maneuver the power steering gear inlet hose as necessary in order to position the hose in the vehicle.





Note:
Hand start the power steering gear inlet hose fittings before finalizing any torques.

2. Connect the power steering gear inlet hose (1) to the steering gear and tighten to 34 Nm (25 lb ft).





3. Connect the power steering gear inlet hose (1) to the power steering pump and tighten to 34 Nm (25 lb ft).

4. Clean any excess power steering fluid from the vehicle.

5. Remove the drain pans.

6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding Service and Repair.

pro multis · About Operation CHARM