Cylinder Head Assembly: Specifications

Cylinder Head M11 Bolts

First Pass in Sequence 30 Nm (22 lb ft)
Second Pass in Sequence 90 degrees
Final Pass in Sequence 70 degrees

Cylinder Head M8 Bolts - in Sequence 30 Nm

Use NEW cylinder head bolts





Surface Flatness

Block Deck
Measured within a 152.4 mm (6.0 in) Area 0.08 mm (0.003 in)
Measuring the Overall Length of the Cylinder Head 0.1 mm (0.004 in)
Exhaust Manifold Deck 0.13 mm (0.005 in)
Intake Manifold Deck 0.08 mm (0.0031 in)

Intake manifold Intake Manifold

Exhaust manifold Exhaust Manifold