Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Corvette V8-6.2L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Heads Up Display Unit >> Service and Repair >> Head-Up Display Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Head-Up Display Replacement




Head-Up Display Replacement

Removal Procedure





1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LS7 or LS9) Battery Negative Cable Disconnection and ConnectionBattery Negative Cable Disconnection and Connection (LS3) Battery Negative Cable Disconnection and Connection.

2. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement Instrument Panel Assembly Replacement.

3. Remove the retaining screw that secures the head up display (HUD) to the steering column bracket.

4. Remove the HUD retaining nuts.

5. Remove the HUD from the vehicle.

Installation Procedure





1. Transfer the retaining screw and nut to the replacement HUD.

2. Install the HUD to the vehicle:

1. Install the HUD onto the dash panel mounting studs.

2. Slide the HUD retaining screw into the slot on the steering column bracket.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the HUD retaining nuts.

Tighten the nuts to 5 Nm (44 lb in).

4. Tighten the screw that retains the HUD to the steering column bracket.

Tighten the screw to 3 Nm (27 lb in).

5. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement Instrument Panel Assembly Replacement.

6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LS7 or LS9) Battery Negative Cable Disconnection and ConnectionBattery Negative Cable Disconnection and Connection (LS3) Battery Negative Cable Disconnection and Connection.

7. Refer to Control Module References Control Module References for programming and setup information.

pro multis · About Operation CHARM