Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Cruze L4-1.4L Turbo >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair




Ignition Coil Replacement

Special Tools

EN-6009 - Remover and Installer Ignition Module

For equivalent regional tools, refer to Special Tools Tools and Equipment.

Removal Procedure

1. Remove engine sight shield.




2. Disconnect ignition coil wiring harness plug (2) from ignition coil (1).




3. Remove the 2 ignition coil bolts (1).




4. Install EN-6009 - remover/installer (1) to ignition coil (2).
5. Remove the ignition coil.

Installation Procedure

1. Install the ignition coil.




2. Remove EN-6009 - remover (1) from ignition coil (2).





Caution: Refer to Fastener Caution Fastener Caution.

3. Install the 2 ignition coil bolts (1) and tighten to 8 Nm (71 lb in).




4. Connect ignition coil wiring harness plug (2) to ignition coil (1).
5. Install engine sight shield.

pro multis · About Operation CHARM