Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Orlando (CANADA) L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Cable: Adjustments




Range Selector Lever Cable Adjustment

Warning

The automatic transaxle range selector cable is made out of two cable sections. After initial connection never separate the two metal couplings from one another. Integrity of the connection of the two metal couplings will be lost if separation of the two metal couplings occurs. When servicing the transaxle remove the cable at the automatic transaxle range selector lever and at the automatic transaxle range selector cable bracket. If either section of the cable needs to be replaced, replace both of the cable sections. Loss of connection integrity of the two metal couplings can cause loss of transaxle shift control which could result in personal injury.

Note: Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the Park position only. Failure to do so may cause miss-adjustment.

1. Set the park brake and chock the wheels.

2. Remove instrument panel center molding Instrument Panel Center Molding Replacement Instrument Panel Center Molding Replacement.

3. Verify the transmission range select lever is in the park position.




4. Release the range select cable adjuster clip (1).

5. Turn cable adjuster clip 90 degrees counterclockwise direction.

6. Verify the transmission manual shift lever is in the park position.

7. Turn cable adjuster clip 90 degrees clockwise direction.

8. Install instrument panel center molding Instrument Panel Center Molding Replacement Instrument Panel Center Molding Replacement.

9. Check the transmission range selector lever in all gear selections for proper operation.

pro multis · About Operation CHARM