Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair




Brake Pedal Position Sensor Replacement

Removal Procedure

1. Remove the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement (Without AAL) Instrument Panel Lower Trim Pad Cover Replacement (Without AAL)Instrument Panel Lower Trim Pad Cover Replacement (With AAL) Instrument Panel Lower Trim Pad Cover Replacement (With AAL).





2. Disconnect the brake pedal position sensor electrical connector.

3. Remove the brake pedal position sensor bolt (1).

4. Remove the brake pedal position sensor.

Installation Procedure





Note:
Ensure the fork of the brake pedal position sensor is positioned over the brake pedal post.

1. Install the brake pedal position sensor to the brake pedal bracket.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the brake pedal position sensor bolt (1) and tighten to 3 Nm (27 lb in).

3. Connect the brake pedal position sensor electrical connector.

4. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .

5. Install the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement (Without AAL) Instrument Panel Lower Trim Pad Cover Replacement (Without AAL)Instrument Panel Lower Trim Pad Cover Replacement (With AAL) Instrument Panel Lower Trim Pad Cover Replacement (With AAL).