Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Traverse AWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 98. Valve Lifter Installation - Right Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

98. Valve Lifter Installation - Right Side




Valve Lifter Installation - Right Side





Note:
Do not stroke/cycle the stationary hydraulic lash adjuster plunger without oil in the lower pressure chamber.

Note:
Do not allow the stationary hydraulic lash adjuster to tip over, plunger down, after the oil fill.

1. Fill the stationary hydraulic lash adjuster (SHLA) with clean engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers for recommended engine oil. Take precautions to prevent scratching the pivot sphere area (1) of the SHLA.

2. Lubricate the SHLA bores in the cylinder head with clean engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers for recommended lubricant.





3. Install the SHLAs in the cylinder head.

4. Apply a liberal amount of lubricant to the SHLA pivot spheres. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers for recommended lubricant.

pro multis · About Operation CHARM