41. Intake Manifold Assemble

Intake Manifold Assemble




1. Install a NEW intake manifold gasket (1).
2. Install the manifold absolute pressure sensor (3).
3. Install the manifold absolute pressure sensor bolt (2) and tighten.




4. Install the fuel injector (2) to fuel rail.
5. Install the fuel injector retainer clamp (3).




6. Install the fuel rail (1).

Caution: Refer to Fastener Caution Fastener Caution.

7. Install the 2 fuel rail bolts (2) and tighten to 7 Nm (62 lb in).




8. Install the evaporative emission canister purge solenoid valve (2) to the intake manifold.
9. Install the evaporative emission canister purge solenoid valve bolt (1) and tighten.