Cylinder Head Assembly
Replace all cylinder head bolts
Cylinder Head Bolt - M8
First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees
Cylinder Head Bolt - M11
First Pass 30 Nm (22 lb ft)
Final Pass 150 Degrees
Left Sequence:
Right Sequence:
Warpage less than 0.05 mm (0.002 in)
Camshaft bearing cap
Tighten 10 Nm (89 lb in)
Loosen bolts (1, 2, 3, 4)
Retighten bolts (1, 2, 3, 4) 10 Nm (89 lb in)
Right (DI):
Left (DI):
Intake manifold
Exhaust manifold Specifications
Camshaft gear Specifications