Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil Installation




Ignition Coil Installation

Special Tools

EN-6009 - Remover/Installer Ignition Module

For equivalent regional tools, refer to Special Tools Special Tools.





1. Install the ignition coil module (2) with the EN-6009 - remover/installer (1).

2. Remove the EN-6009 - remover/installer (1).

Caution:
Refer to Fastener Caution Fastener Caution

Note:
Note the arrow on the cover.

3. Install the 2 ignition coil bolts an tighten to 8 Nm (71 lb in).

Note:
Note the arrow on the cover.

4. Install the cover of the DIS ignition coil against the direction of the arrow.