Clutch: Specifications

FASTENER TIGHTENING SPECIFICATIONS
Clutch Housing to Engine 75 Nm (55 lbs. ft.)
Clutch Pedal Screw 37 Nm (27 lbs. ft.)
Master Cylinder 18 Nm (13 lbs. ft.)
Secondary Cylinder 18 Nm (13 lbs. ft.)
Inspection Cover 17 Nm (12 lbs. ft.)
Hydraulic Line Clamp Nuts 46 Nm (40 in. lbs.)
Flywheel to Crankshaft Bolts 100 Nm (75 lbs. ft.)
Clutch Cover to Flywheel......Tighten each screw one turn at a time to avoid warping the clutch cover.

NOTE: The OE service manual does not provide a tightening specification for the clutch cover to flywheel screws.