Front Bumper Fascia Replacement

Front Bumper Fascia Replacement










Preliminary Procedure

TipCarefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

TipCarefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

Notice:Refer to.
Tighten
Tip-Disconnect the lamp electrical connectors.-Pull out on the fascia to release the tabs on the fascia brackets.-Energy absorber is attached to the front fascia.