Engine Support Fixture

Engine Support Fixture

Tools Required

* J 28467-B Universal Engine Support Fixture
* J 36462-A Engine Support Adapter Leg Set
* J 41602 Body Protection Hoist Adapter Set

Installation Procedure




1. Remove the air cleaner assembly.
2. Install the J 41602 (1) to the fender pinch welds as far forward as possible.
3. From the J 28467-B, place the J 28467-4A (2) across the engine compartment on top of the J 41602 (1).




4. From the J 28467-B, install the J 28467-8A hook to the J 28467-6A bracket, and install the J 28467-34 wing nut and washer.
5. Repeat the previous step in order to assemble two lift hooks and brackets.




6. Place the hook on J 28467-8A (1) through the engine lift bracket on the engine, and set the J 28467-6A (3) onto the J 28467-4A (4)




7. Place the J 36462-A (1) onto the J 28467-4A.
8. Place the J 28467-4A (2) in the corner of the core support.
9. Install the J 28467-1A bracket (3) where the J 36462-A (1) and the J 28467-4A intersect.
10. Hand tighten the J 28467-1A bracket wing nuts.
11. Install the second hook and bracket assembly to the J 36462-A (1) and install the hook to the engine lift bracket.




12. Prior to lifting and/or supporting the engine, ensure that the lift hooks do not interfere with any adjacent components.

Removal Procedure




1. Remove the hook from the engine lift bracket and remove the hook and bracket assembly from the J 36462-A (1).
2. Loosen the J 28467-1A bracket wing nuts.
3. Remove the J 28467-1A bracket (3) from where the J 36462-A (1) and the J 28467-4A intersect.
4. Remove the J 36462-A (1).




5. Remove the hook on J 28467-8A (1) from the engine lift bracket on the engine, and remove the J 28467-6A (3) from the J 28467-4A (4)




6. Remove the J 28467-34 wing nut and washer, and remove the J 28467-8A hook from the J 28467-6A bracket.
7. Repeat the previous step in order to disassemble the 2 lift hooks and brackets.




8. Remove the J 28467-4A (2) from across the engine compartment.
9. Remove the J 41602 (1) from the fender pinch welds.
10. Install the air cleaner assembly.