Air Delivery Improper

Air Delivery Improper

Test Description

Step 1 - Step 11:

Step 12 - Step 19:

Step 20 - Step 23:

The numbers below refer to the step numbers on the diagnostic table.
3. This step tests for a blower motor that does not operate regardless of the desired blower motor speed.
4. This step tests for a blower motor that operates, yet does not accurately respond to the desired blower motor speed.
5. This step verifies that there is power to the HVAC control assembly.
13. The voltage will vary between 0-5 volts during normal operation. The HVAC control assembly connector must be connected during this step.