Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Battery 1: The scan tool displays volts. The state of the battery voltage supplied to the body control module.

Washer Switch: The scan tool displays On/Off. The scan tool displays ON when the windshield washers are requested.

Wiper Ground: The scan tool displays On/Off. The BCM Displays whether the ground circuit for the windshield wipers are requested.

Wiper Park Switch: The scan tool displays On/Off. This output displays On when the wipers are in park position and Off when the wipers are not in the park position.

Wiper Relay Cmd: The scan tool displays On/Off. This output displays the state of the wiper relay. ON is displayed when the body control module is providing battery voltage for the wiper relay.

Wiper Switch: The scan tool displays volts. This output displays the voltage supplied to the wiper switch.

Wiper Switch State: The scan tool displays Undefined, Off, delay 1, delay 2, delay 3, Mist/High/Low. This output displays the state of the wiper switch.