Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1990 >> Imperial V6-201 3.3L VIN R FI >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Connecting >> MST-6100 ABS System Tester Hookup Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

MST-6100 ABS System Tester Hookup Procedure

MST-6100 ABS System Tester Hookup Procedure

Install the tester by following these steps:
1. Turn vehicle ignition off.
2. Open vehicle trunk and pull back rear seat bulkhead trim panel to gain access to Anti-lock Brake Control Module (ABM) connector.
3. Disconnect ABCM connector by pulling lock plate away from connector and pivoting harness connector away from ABCM.
4. Connect large end of tester harness to vehicle harness.
5. Connect small end of tester harness to either the PINOUT Box connector or the Vehicle System Tester connector as required.
pro multis · About Operation CHARM