Electronic Brake Control Module: Testing and Inspection

Early Production ABS Testing Procedures
With ABS Test Equipment
ABCM 35 Way Connector Service

Anti-Lock Brake Control Module 35-Way Connector:

To Disengage/Engage the Connector:
1. Pull the rear seat bulkhead trim panel toward you.
2. Pull the connector lock plate on the Anti-lock Brake Control Module (ABM) away from the connector.
3. Rotate connector body away from ABCM and unhook connector from opposite end of ABCM.
4. Reverse procedure to engage connector, checking to be sure the lock plate is engaged in the connector.