Engine Control Module: Service and Repair

Fig. 33 Auxiliary Jumper Terminal:

Fig. 34 PCM Bracket Screws:

The PCM attaches to a bracket between the air cleaner housing and Power Distribution Center (PDC) Fig. 33.

REMOVAL
1. Disconnect negative cable from auxiliary jumper terminal Fig. 34.
2. Disconnect both 40-way connectors from PCM.
3. Remove screws attaching PCM to bracket Fig. 34.
4. Lift PCM up to remove it from vehicle.


INSTALLATION
1. Install PCM. Tighten mounting screws.
2. Attach both 40-way connectors to PCM.
3. Connect negative cable to auxiliary jumper terminal.