Rear Window -- Right

CIRCUIT OPERATION
When the DRIVER selects window DOWN operation power is supplied on the F21 circuit through the switch to circuit Q32. Circuit Q32 connects from the drivers door switch to the window timer module. The power is passed though the normally CLOSED contacts in the module to circuit Q25. Circuit Q28 connects from the module to the motor.

Ground for the window motor is supplied on the Q18 circuit. Circuit Q15 connects from the right rear window motor to the master switch. A bus bar, internal to the switch, connects the Q18 circuit to the Z1 circuit. The Z1 circuit is terminated at the Instrument Panel left side cowl.

For window UP operation the circuits are reversed. Circuit Q15 is the feed, and circuit Q32 and circuit Q28 are the ground.