Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1998 >> Sebring Convertible V6-2.5L VIN H >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

AIR CONDITIONING BELT AND GENERATOR BELT

Air Conditioning Compressor And Generator Belt Idler:





To remove and install the air conditioning compressor and generator drive belt, first loosen the idler pulley lock bolt, then turn the adjusting screw to increase or decrease the idler pulley tension.
To adjust the air conditioning and generator drive belt, loosen the idler pulley bolt and adjust belt tension by turning adjusting screw. Tighten pulley bolt to 54 Nm (40 ft. lbs.) after adjustment.

POWER STEERING PUMP BELT

Power Steering Belt Adjustment:





1. From the top of the vehicle loosen pivot bolt.
2. From under the vehicle loosen the locking bolts F and G.





3. Install the belt. Adjust belt tension with 1/2 inch breaker bar installed in adjusting bracket. See Belt Tension Chart.
4. Tighten locking bolt G to 28 Nm (250 inch lbs.).
5. Tighten locking bolt F and the pivot bolt to 54 Nm (40 ft. lbs.).

pro multis · About Operation CHARM