Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1998 >> Sebring V6-2.5L VIN N >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Core >> Service and Repair >> Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Replacement





REMOVAL
For removal follow steps in image and note the following:




Step 12 --- Clip Removal
1. Use a philips-head screwdriver to push inward the pin (at the center of the clip) to a depth of about 2 mm (0.08 in.).
2. Pull the clip outward to remove it.

CAUTION: Do not push the pin inward more than necessary because it may damage the grommet, or the pin may fall in, if pushed too far.

INSTALLATION
For installation reverse steps in image and note the following:

Step 13 --- Cooling Unit Installation
When replacing the cooling unit with new one, refill the evaporator with a specified amount of compressor oil.
Compressor oil: SUN PAG 56
Quantity: 60 cubic cm (2.03 fl oz)




Step 12 --- Clip Installation
1. With the pin pulled out, insert the clip into the hole.
2. Push the pin inward until the pin's head is flush with the grommet.
pro multis · About Operation CHARM