Parking Lamp: Service and Repair

REMOVAL
1. Remove screw attaching side marker lamp.

Front Parking And Turn Signal Lamp:

2. Remove housing by pulling outward and away from the fascia.
3. Remove screw attaching parking and turn signal lamp housing to fascia.

Front Parking And Turn Signal Lamp Bulb:

4. Rotate lamp socket(s) counterclockwise one quarter turn.
5. Pull bulb socket(s).

Front Side Marker Lamp Sockets:

6. Remove parking and turn signal lamp housing from vehicle.

INSTALLATION
1. Insert bulb socket into housing.
2. Rotate parking and turn signal socket clockwise one quarter turn.
3. Verify bulb(s) operation.
4. Install screw attaching parking and turn signal lamp housing.
5. Install screw attaching side marker lamp.