Convertible Top: Testing and Inspection

The power convertible top hydraulic system consists of:
^ Two hydraulic cylinders
^ Hydraulic lines
^ Electric hydraulic pump and reservoir
^ Dual relays

HYDRAULIC SYSTEM TESTS

NOTE: The convertible top will raise slowly or make abnormal noise if the hydraulic fluid level is low.

1. Remove rear seat cushion and back.
2. With the top up and latched, remove the reservoir fill plug.
3. Visually inspect fluid level. If low, inspect for leak in hydraulic system.
4. Fill reservoir with Dextron II automatic transmission fluid to the bottom of the fill hole.
5. Repair or replace components, as necessary.
6. Replace fill plug and lower top.
7. Raise top and verify fluid level.