Backup Light Bulb: Service and Repair

REMOVAL
1. Release decklid latch and open decklid.
2. Remove wing-nuts attaching tail lamp to rear closure panel.
3. Remove lamp from opening in quarter panel.
4. Disconnect wire connector from back of tail lamp.
5. Rotate socket counterclockwise one quarter turn.

Back - Up Lamp Bulb:

6. Pull socket from back of lamp.
7. Pull bulb from socket.

INSTALLATION
1. Place bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Connect wire connector from back of tail lamp.
5. Install lamp from opening in quarter panel.
6. Install wing-nuts attaching tail lamp to rear closure panel.
7. Close decklid.