Trim Panel: Service and Repair

DOOR TRIM PANEL

REMOVAL
1. Roll door glass down.
2. Disengage clips holding speaker grille to door trim panel.

Fig. 28 Door Trim Panel Clips:

3. Remove screws holding door trim panel to door.
4. Disengage clips holding perimeter of trim panel to door.
5. Lift trim panel upward and disengage trim panel from upper retainer channel.
6. Tilt trim panel away from door.
7. Disengage clip holding latch linkage to back of inside door handle.
8. Disconnect electrical connectors as necessary.
9. Remove door trim panel from door.

INSTALLATION
1. Position door trim panel next to door.
2. Connect electrical connectors as necessary.
3. Engage clip holding latch linkage to inside door handle.
4. Position door trim panel on door and engage trim panel to upper retainer channel.
5. Engage clips holding perimeter of trim panel to door.
6. Install screws holding trim panel to door.
7. Engage clips holding speaker grille to door trim panel.