Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2000 >> Sebring Convertible V6-2.5L VIN H >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine: Adjustments

OVERVIEW
The right and left support assemblies are slotted to allow for right/left drive train adjustment in relation to drive shaft assembly length.
Check and reposition right and left engine support assemblies as required. Adjust drive train position, if required, for the following conditions:
- Drive shaft distress: See Transmission and Drivetrain.
- Any front end structural damage (after repair).
- Support Assembly replacement.

ENGINE SUPPORT ADJUSTMENT
1. Remove the load on the engine motor mounts by carefully supporting the engine and transmission assembly with a floor jack.
2. Loosen the right engine support assembly vertical fasteners.
3. Loosen the left engine support assembly vertical bolts.
4. Pry the engine right or left as required to achieve the proper drive shaft assembly length.
5. Tighten right engine support assembly vertical bolts to 61 Nm (45 ft. lbs.). and tighten left engine support assembly bolts to 61 Nm (45 ft. lbs.).
6. Recheck drive shaft length.

pro multis · About Operation CHARM