Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2000 >> Sebring Convertible V6-2.5L VIN H >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Valve: Service and Repair

If the EGR system operates incorrectly, replace the entire EGR valve and transducer together. The EGR valve and electrical transducer are calibrated together. The EGR valve attaches to the front exhaust manifold. The transducer/solenoid attach to the front cylinder head.

REMOVAL
1. Remove the negative battery cable.
2. Disconnect vacuum supply from solenoid.
3. Disconnect electrical connector from solenoid.
4. Remove screws holding transducer to bracket.

Fig.4 TCM Removal:




Fig.5 EGR Removal:




5. Remove screws holding Transmission Control Module (TCM) to bracket. Swing TCM up to allow access to EGR screws.
6. Remove screws holding EGR tube.
7. Remove EGR valve mounting screws. Remove EGR valve and transducer.
8. Clean gasket surfaces. Discard old gaskets. If necessary, clean EGR passages.

INSTALLATION
1. Loosely install EGR valve with new gaskets.
2. Finger tighten EGR tube fasteners.
3. Tighten EGR valve mounting screws to 22 Nm (200 in. lbs.) torque.
4. Tighten EGR tube fasteners to 11 Nm (95 in. lbs.) torque.
5. Install transducer to bracket.
6. Connect vacuum supply to solenoid.
7. Attach electrical connector to solenoid.
8. Install the negative battery cable.
pro multis · About Operation CHARM