Overhead Console Replacement

REMOVAL

Negative Battery Cable:

1. Disconnect and isolate the battery negative cable.

Overhead Console:

2. Open the transmitter bin door.
3. Remove screw holding the overhead console to the headliner. With the screw removed the console is retained by one engagement tab located inside the eyeglass storage bin.
4. Open the eyeglass bin door.
5. Press the retaining tab which is located directly above the door latch.
6. Lower rear of console away from headliner.
7. Pull console rearward to disengage clips holding front of console to roof armature and lower con
8. Disconnect wire connectors from back of CMTC and reading lamps. Ensure the connectors lock tabs are fully depressed before disconnecting.
9. Remove overhead console.

INSTALLATION
For installation, reverse the above procedures.