Fluid Line/Hose: Service and Repair

REMOVAL
1. Remove air inlet resonator and hoses (41TE equipped only).





Fig. 43





Fig. 44

2. Loosen hose clamps at transaxle and radiator connections (Fig. 43) or (Fig. 44).
3. Remove hoses.

INSTALLATION
1. Position hoses and clamps (Fig. 43) or (Fig. 44).
2. Tighten clamps to 2 Nm (18 inch lbs.).
3. Install air inlet resonator and hoses (41TE equipped only).
4. Start engine and check transaxle fluid level. Adjust fluid level as necessary.