Floor Console

FLOOR CONSOLE

REMOVAL

1. Remove shift knob.
2. Remove floor console shift bezel.

Fig. 14:

Fig. 15:

3. Remove side panels (Fig. 14), or (Fig. 15).
4. Disconnect the electrical connectors.
5. Remove fasteners attaching forward bracket to instrument panel.

Fig. 16:

6. Remove fasteners attaching bottom of console storage bin to rear mounting bracket (Fig. 16).
7. Remove floor console from vehicle.

INSTALLATION

1. If power tap wire harness was removed reattach the harness with tape, along the indicated markings.
2. If previously removed, install the power outlet tap.
3. Place center console in position on vehicle.
4. Install fasteners attaching forward bracket to instrument panel.
5. Install fasteners attaching bottom of console storage bin to rear mounting bracket.
6. Connect the electrical connectors.
7. Install side panels.
8. Install center console shift bezel.
9. Install shift knob.