Cruise Control Vacuum Reservoir: Service and Repair

REMOVAL
1. Remove the pass anger side cowl screen.

Fig.6 Vacuum Reservoir Mounting:

2. Remove vacuum reservoir mounting nuts.

Vacuum Reservoir Connections:

3. Remove vacuum hose and throttle cable tie strap push clip.
4. Remove vacuum reservoir,

INSTALLATION
1. Install vacuum reservoir, install nuts and tighten to 5.6 Nm (50 in. lbs.)
2. Install vacuum hose.
3. Install the throttle cable push clip onto reservoir.

NOTE: Throttle cable must be clipped to the reservoir to prevent contact with the exhaust manifold.

4. Install the passenger side cowl screen.