Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2001 >> Sebring Convertible V6-2.7L VIN U >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Procedures >> Automatic Transmission
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Automatic Transmission



CONSOLE

REMOVAL

1. Raise parking brake lever as high as possible.
2. Move transmission Shifter to neutral position.
3. Loosen set screw on front of shifter knob and remove shift lever knob.
4. Remove lighted transmission range indicator letter bezel.
5. Disconnect transmission range indicator bezel wire connector at the Shifter mechanism.
6. Remove screws, next to floor shifter and in console storage compartment, attaching floor console to brackets on floor pan.
7. Disconnect wire connector for floor console accessories at floor pan.
8. Remove console from vehicle.

NOTE: The grip portion of the parking brake lever Will only fit through the wider lower portion of the slot in the floor console.


INSTALLATION

1. Fully engage parking brake.
2. Connect the electrical connectors.
3. Engage forward tabs on console into forward instrument panel console.
4. Locate the 4-way locator on the forward portion of console to shifter bracket.
5. Locate the 2-way locator on the rearward portion of console base into floor bracket hole.
6. Align rearward portion of the console to clips in the floor bracket.
7. Install screws, next to floor shifter and in console to shifter bracket.
8. Install the shifter boot.
pro multis · About Operation CHARM