Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2001 >> Sebring Convertible V6-2.7L VIN U >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Track >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Track: Testing and Inspection

The following will determine whether or not voltage is continuous through the body harness to the switch.
1. Disconnect the power seat switch electrical connector (Refer to ELECTRICAL/POWER SEATS/ DRIVER SEAT SWITCH - REMOVAL).

Fig. 4 Seat Switch Electrical Connector:




2. Using a voltmeter, connect the ground lead to PIN B of the switch harness connector. Connect the positive lead to PIN A. If battery voltage is present, the ground and voltage circuits to the power seat switch are OK. Check the power seat switch for proper operation (Refer to ELECTRICAL/POWER SEATS/DRIVER SEAT SWITCH - DIAGNOSIS AND TESTING). If the seat switch checks out OK, remove the seat assembly and check the circuits from the power seat switch to the power seat track adjuster motors for proper continuity. If the circuits appear to be OK, replace the power seat track and adjuster motors as an assembly.

pro multis · About Operation CHARM