Trunk Lining

TRUNK LINING

REMOVAL

Fig. 12:

1. Remove fasteners (three per side) attaching carpet to shelf panel. Fasteners are accessed from inside the vehicle (Fig. 12).
2. Pull out leading flaps of the carpet through the opening from the shelf panel.
3. Pull carpet from under the springs.
4. Remove trunk carpet from vehicle.

INSTALLATION

1. Place carpet in truck and smooth out.
2. Tuck both sides of the carpet ends under springs.
3. Position the leading flaps of the carpet through the opening onto the shelf panel.
4. Install fasteners (three per side) to secure the carpet to shelf panel (install fasteners from inside the vehicle).
5. Overlap the slits in the back of the carpet so the center section lays over the outer sections.