Adding Additional Coolant

ADDING ADDITIONAL COOLANT





NOTE: The radiator cap should not be removed. When additional coolant is needed, it should be added to the coolant recovery/reserve container. Use only a 50/50 concentration of the recommended ethylene glycol type antifreeze and distilled water.

CLEANING
Drain cooling system and refill with clean water. Run engine with radiator cap installed until upper radiator hose is hot. Stop engine and drain water from system. If water is dirty; fill, run, and drain system again, until water runs clear. Refill cooling system with a 50/50 mixture of the recommended ethylene glycol and distilled water.

INSPECTION
After performing a cleaning/flush procedure, inspect all hoses, clamps and connections for deterioration and leaks. Inspect radiator and heater core for leaks.