Rear Fog Lamp Replacement

REMOVAL
Fog Lamp Unit
1. Disconnect and isolate the battery negative cable.
2. Remove the appropriate two rear fog lamp retaining screws.
3. Pull the fog lamp assembly from the rear bumper fascia.
4. Rotate and pull the lamp socket from the lamp housing.
5. Remove lamp assembly from vehicle.

Fog Lamp Bulb
1. Remove the fog lamp unit from the rear bumper fascia (Refer to LAMPS/LIGHTING - EXTERIOR/FOG LAMP - REMOVAL).

Fig.24 Rear Fog Lamp Socket:

2. Rotate the bulb, push in and turn the bulb counterclockwise.

INSTALLATION
Fog Lamp Unit
1. Install the lamp socket into the lamp housing.
2. Install the lamp assembly into rear bumper fascia.
3. Install the appropriate two rear fog lamp retaining screws.
4. Connect the battery negative cable.

Fog Lamp Bulb
1. Push in and turn the bulb clockwise.
2. Install the fog lamp unit into the rear bumper fascia (Refer to LAMPS/LIGHTING - EXTERIOR/FOG LAMP - INSTALLATION).