Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2002 >> Neon (CANADA) L4-2.0L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Motor: Service and Repair

REMOVAL
1. Remove wiper module (Refer to WIPERS/WASHERS/WIPER MODULE - REMOVAL).
2. Remove linkage from motor crank. Insert screwdriver or equivalent between crank and linkage then twist and lift straight up on linkage.
3. Remove three motor mounting screws and separate motor from linkage.

INSTALLATION
1. Attach motor to module. Install the three motor mounting screws and tighten the motor mounting screws to 5 - 6 Nm (45 - 55 in. lbs.) torque.

NOTE:
- If motor crank was taken off for any reason, install and tighten drive link nut to 11 - 12 Nm (98 - 106 in. lbs.) torque.
- Make sure motor is parked before attaching the wiper arms.

2. Add unilube grease to the linkage socket and install the linkage onto the motor crank.
3. Install the wiper module (Refer to WIPERS/WASHERS/WIPER MODULE - INSTALLATION).
pro multis · About Operation CHARM