Wiper Arm: Service and Repair

REMOVAL
1. Place the wiper arm/blades in the PARK position and turn ignition OFF.
2. Remove the top cover from arm and remove nut.

Fig.9 Wiper Arm Removal:

3. Using a puller remove the wiper arm from the pivot.
4. Disconnect the washer hose at the plastic in-line connector. Be sure that the in-line connector is saved.

INSTALLATION
1. Connect the washer hose to the inline connector.
2. Position the wiper arm on the oost.
3. Install the retaining nut.
4. Install the nut cover.