Seat Track: Service and Repair

REMOVAL
Before the seat track can be removed, the front seat assembly must be removed from the vehicle. Refer to the Body section for the Front Seat Removal and Installation procedure.
1. Disconnect and isolate the battery negative remote cable.
2. Remove the appropriate front seat from the vehicle. Once the front seat is removed, lay it on a clean surface upside down to expose the underside of the seat assembly.
3. Remove the seat cushion side shields from the seat assembly. Refer to the Body section for the Seat Cushion Side Shield Removal and Installation procedure.
4. Disconnect the necessary power seat electrical connectors.
5. Remove the bolts retaining the power seat track to the seat assembly and remove.

INSTALLATION
1. Position the seat track and install the retaining bolts. Torque the bolts to 12 Nm (108 in. lbs.).
2. Connect the necessary power seat electrical connectors.
3. Install the seat cushion side shields on the seat assembly. Refer to the Body section for the Seat Cushion Side Shield Installation procedure.
4. Install the appropriate front seat in the vehicle. Refer to the Body section for the Seat Installation procedure.
5. Connect the battery negative remote cable.