Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2002 >> Sebring LX Sedan L4-2.4L VIN X >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo: Service and Repair

REMOVAL

Fig.2 Negative Battery Cable:




1. Disconnect the negative battery cable.
2. Remove 2 nuts attaching servo bracket to shocktower.
3. Disconnect electrical connectors and vacuum hose.
4. Remove two nuts attaching speed control cable and mounting bracket to servo.

Fig.3 Speed Control Cable And Bracket:




5. Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo.
6. Remove servo mounting bracket.

INSTALLATION
1. With throttle in full open position feed cable sleeve through hole in bracket, then align hole in speed control cable sleeve with hole in servo pin and install retaining clip.
2. Connect vacuum hose to servo.
3. Connect electrical connector.
4. Insert servo studs through holes in speed control cable and mounting bracket.
5. Install nuts, tighten to 6.7 Nm (60 in. lbs.).
6. Install servo and bracket to stud plate in shocktower and tighten nuts.
7. Connect negative battery cable.
pro multis · About Operation CHARM