Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2003 >> Sebring Convertible L4-2.4L VIN X >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Procedures >> Hydraulic Line Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Hydraulic Line Replacement

HYDRAULIC LINES

REMOVAL
1. Move top to the down position
2. Disconnect battery negative terminal.
3. Remove rear seat cushion and rear seat back.
4. Remove both quarter trim panels.
5. Disconnect pump wire connector.
6. Remove motor from floor panel. Holding motor pump assembly with reservoir up, squeeze fill plug to release any air pressure from system.
7. Disconnect hydraulic line from hydraulic cylinders.
8. Disconnect hydraulic line from hydraulic pump.
9. Remove hydraulic line from vehicle. Carefully drain hydraulic line and properly dispose of fluid and component.

INSTALLATION
1. Position hydraulic line to vehicle.
2. Connect hydraulic line to hydraulic pump. Tighten fittings to 11 - 12 N.m (98 - 106 in. lbs.) torque.
3. Connect hydraulic line to hydraulic cylinders. Tighten fittings to 8.5 - 9.5 N.m (75 - 84 in. lbs.) torque.
4. Connect battery negative terminal.
5. Bleed system.
6. Verify system operation.
7. Install quarter trim panels.
8. Install rear seat cushion and rear seat back. Ensure the rear seat back will not pinch and/or kinks the hydraulic lines.

pro multis · About Operation CHARM