Natural Vacuum Leak Detection Assembly

REMOVAL
1. Disconnect thew negative battery cable.

Fig. 4 NVLD Location:

2. Raise vehicle and support.
3. Unlock and disconnect the electrical connector.
4. Remove the hoses from the NVLD valve.
5. Remove the 2 fasteners.

Fig. 5 NVLD Removal/Installation:

6. Remove the valve and bracket from vehicle.

Fig. 6 NVLD Value And Bracket:

7. Remove valve from bracket.

INSTALLATION
1. Install NVLD valve to the bracket.
2. Install valve and bracket to the vehicle.
3. Install the 2 mounting bolts and tighten.
4. Install the electrical connector and lock.
5. Install the 2 hoses and lock the clamps.
6. Lower vehicle.