Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2003 >> Voyager L4-2.4L VIN B >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Systems: Testing and Inspection

1. Connect a DRB III scan tool to the Data Link Connector (DLC), located at left side of the steering column and at the lower edge of the lower instrument panel.
2. Turn the ignition key to ON position. Exit vehicle with scan tool. Use the latest version of the proper cartridge.
3. After checking that no one is inside the vehicle, connect the battery negative terminal.
4. Using the DRB III scan tool, read and record active diagnostic code data.
5. Read and record any stored diagnostic codes.
6. Refer to the proper Body Diagnostic Procedures manual if any diagnostic codes are found in Step 4 or Step 5.
7. Erase stored diagnostic codes if there are no active diagnostic codes. If problems remain, diagnostic codes will not erase. Refer to the Proper Body Diagnostic Procedures Manual to diagnose the problem. If airbag warning lamp either fails to light, or goes ON and stays ON, there is a system malfunction. Refer to the proper Body Diagnostic Procedures manual to diagnose the problem.
pro multis · About Operation CHARM