Shift Cable: Service and Repair

41TE - Automatic Transmission
GEARSHIFT CABLE - REMOVAL
1. Disconnect battery cables.
2. Remove battery shield.
3. Remove battery.
4. Remove speed control servo and position out of way.





5. Disconnect gear shift cable at manual valve lever (Fig. 214).
6. Disconnect gear shift cable from upper mount bracket (Fig. 214).





7. Remove instrument panel lower silencer (Fig. 215).





8. Remove knee bolster (Fig. 216).





9. Disconnect gear shift cable from gear shift lever (Fig. 217).
10. Remove gear shift cable from column bracket (Fig. 217).





11. Disengage grommet from dash panel (Fig. 218) and remove gear shift cable from inside vehicle.







INSTALLATION
1. Fish gear shift cable dash panel opening into engine compartment and secure grommet (Fig. 219).





2. Install gear shift cable through column bracket (Fig. 220) until audible "click" is heard.
3. Connect gear shift cable to gear shift lever (Fig. 220).





4. Install knee bolster (Fig. 221).





5. Install instrument panel lower silencer (Fig. 222).





6. Install gear shift cable to transaxle upper mount bracket (Fig. 223). An audible "click" should be heard.
7. Connect gear shift cable end to transaxle manual valve lever (Fig. 223).
8. Adjust gearshift cable.
9. Install speed control servo into position.
10. Install battery.
11. Install battery shield.
12. Connect battery cables.