Door Lock Cylinder: Service and Repair

LOCK CYLINDER

REMOVAL







1. Remove the door weatherstrip (2) from the door in the area of the door lock.
2. Loosen the screw (1), pull door handle out to the stop and hold it in place. Retighten the screw (1) lightly with the handle in this position. Left front door: Right-hand thread. Right front door: Left-hand thread.

NOTE: The screw will not fall out.




3. Remove the 4 mm Allen screw (1) on the face of the door.
4. Remove the lock cylinder.

INSTALLATION










1. Install the lock cylinder and install the screw (1).
2. Loosen the screw (1) and retighten without pulling or holding the door handle.
3. Check the door lock release for proper function by closing the catch in the door latch with a suitable tool and releasing it with the door handle.
4. Insert the door weatherstrip (2) into the channel.
5. Check for proper door and handle function.