Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Lighting and Horns >> Backup Lamp >> Backup Lamp Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Backup Lamp Switch: Service and Repair

BACKUP LAMP SWITCH

REMOVAL
1. Disconnect the negative battery cable.
2. Put the transmission in reverse.
3. Raise and support the vehicle.





4. Disconnect the backup lamp switch harness connector (1).





5. Remove the backup lamp switch retaining bolt (1).
6. Remove the backup lamp switch (2) and O-ring seal from the transmission.

INSTALLATION
1. Install the backup lamp switch (2) with a new O-ring seal.





2. Install the backup lamp switch retaining bolt (1). Tighten the bolt to 10 Nm (89 inch lbs.).





3. Connect the backup lamp switch harness connector (1).
4. Lower the vehicle.
5. Connect the negative battery cable.
6. Check the operation of the backup lamps.
pro multis · About Operation CHARM