Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oxygen Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

UPSTREAM O2 SENSOR

REMOVAL




Note: The left side O2 sensor is shown. The right side is similar.

1. Disconnect the negative battery cable.
2. Remove the air cleaner housing.
3. Disconnect the O2 sensor harness connector.

4. Remove the O2 sensor (1).

INSTALLATION
1. Apply anti-seize compound to the threaded portion of the O2 sensor.




2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
3. Connect the O2 sensor harness connector.
4. Install the air cleaner housing.
5. Connect the negative battery cable.

DOWNSTREAM O2

REMOVAL




1. Disconnect the negative battery cable.

Note: The left side O2 sensor is shown. The right side is similar.

2. Raise and support the vehicle.
3. Disconnect the O2 sensor harness connector.
4. Remove the O2 sensor (1).

INSTALLATION
1. Apply anti-seize compound to the threaded portion of the O2 sensor.




2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
3. Connect the O2 sensor harness connector.
4. Lower the vehicle.
5. Connect the negative battery cable.




pro multis · About Operation CHARM